mapp Services V5.16
Adding the MpPackMLCore configuration
The MpPackMLCore configuration is added to use the OMAC PackML standard.
|
|
|
Mode "Synchronized" is specified in order to use the OMAC PackML ISA-88 model. Which PackML modes should exist can be defined under "Unit mode". Mode "Production" exists by default. Mode ID 1 is defined for this. When the target system starts up, the machine should start with mode "Production". To ensure this, the mode ID must be defined in "Startup active mode". Finally, option "Reset command after state change" is enabled. The automatic resetting of successfully executed commands allows mapp PackML to be used quickly and easily.
Adding the MpPackMLModule configuration
One MpPackMLModule configuration is added for each module, which means the configuration is added 3 times. The names of the configurations were adapted according to the defined modules.
These configurations are used to establish the hierarchy.
The topmost module in the hierarchy is the main module, which is why the mapp Link gMainModule is specified. "Main" is used as the "Name". "Has parent" is used to define whether or not a module has a higher-level module. Since this is the main module, "No" is specified. For a module to know which modes can be used, a connection to the MpPackMLCore configuration must be established. The configuration is therefore specified under "Unit".
In the second and third MpPackMLModule configuration, the feeder module or printer module is defined. The main module is always defined as the parent module.
